MxPro5 1-4 Loop Fire Panel c/w 1 Loop card - Large Enclosure, Nittan Protocol

Advanced 1-Loop MxPro 5 Fire Control Panel

MX-5101 (Apollo / Hochiki Protocol)

The MxPro 5 series fire control panels provide a powerful and flexible solution for modern fire detection systems. The MX-5101 is supplied with a single loop driver card, two on-board sounder circuits, 20 programmable zonal LEDs with slide-in labels, and 25 system status LEDs for clear and intuitive indication. Four programmable function keys with LED confirmation further enhance operational control.

Utilising the latest dual flash-based microprocessor technology, the panel features a high-resolution, high-contrast graphical LCD display and a tactile alphanumeric keypad. This intuitive “select and click” interface simplifies both engineer configuration and day-to-day user operation.

Advanced cause-and-effect programming, dynamic zoning, and enhanced trace diagnostics make the MX-5101 suitable for a wide range of applications, from small installations to large, complex, multi-area systems. The panel can be fully programmed on-site using the on-board keypad or via PC-NeT configuration software.

PC Software & Networking

A comprehensive suite of user-friendly Windows-based PC software tools is available to support the MxPro 5 range. These include configuration, servicing, logo upload, and virtual panel applications, enabling the full capability of the system to be utilised.

By adding an optional network card, the panel can communicate with other MxPro 5 fire panels, remote terminals, and network peripherals such as ipGateway™, BMS, or graphical interfaces. The Ad-NeT network operates as a true peer-to-peer system and supports both fault-tolerant loop and radial configurations.

Key Features

• 20 programmable zonal LEDs and 25 system status LEDs
• Supports Apollo, Argus Vega, Hochiki, and Nittan Evolution protocols
• Advanced graphical LCD user interface
• Supports up to 200 fire zones as standard, enabling full EN54 compliance without additional hardware
• Dedicated USB and RS232 serial ports for direct PC or modem connection
• Installer-friendly auto-learn, loop detection, and on-board scope facilities
• Graphical display configurable for virtually any language
• Robust, removable chassis with plug-in connectors for easy installation and cabling
• Integral P-Bus for system expansion using optional cards
• Ad-NeT peer-to-peer networking supporting up to 2,000 zones
• Approved to BS EN54 Parts 2, 4, and 13

Part Numbers

Dimensions

450mm (W) × 470mm (H) × 115mm (D)