Emergency Bulkhead is suitable for ceiling and wall installations and has a traditional design making it ideal for retrofit projects.
| Dimensions | 355mm x 115mm x 63mm, quick release hinged gear tray |
| Entries | Rear BESA drill starts, 20mm KO to each end, and one for side entry |
| Input Power | 3.5W Max @ 220/240V |
| Emergency Power | 1W |
| Colour Temperature | 6000-6500K |
| Maintained Mode | 210 Lumens |
| Emergency Mode | 150 Lumens |
| Battery | LiFePO4 3.2V 1.5Ah |
| Selectable Test Modes | Manual Testing selectable by dip-switch on printed circuit board or Automatic Self-Testing conforming with IEC 62034 |
| Automatic Test Regime | First function test 24 hours after connection to the electrical supply
Functional test at monthly intervals
Full duration test (3 hours) at 6 monthly intervals |
| Bi-Colour LED Status | Green On : Normal healthy status
Green Fast Flash : Functional test running
Green Slow Flash : Duration test running
Red On : Battery failure
Red Fast Flash : Duration failure—insufficient battery capacity
Red Slow Flash : Lightsource failure |