The Ei128R is a Hard-Wired Relay Module that switches a relay to activate
external devices when an Alarm in the system is triggered. The electrically
isolated contacts can be used for many applications such as signaling,
turning on lights, strobes etc. It has volt free contacts (Normally Open and
Normally Closed) as standard but can be wired to give a 230V output or
24V output using an external 24V supply.
The Ei128R is 230V AC mains powered and is designed to be installed
underneath an base Alarm. Alternatively the Ei128R can be remotely
sited by using the supplied cover.
The Relay Module contains an internal switch that selects Pulse or
Continuous output modes of operation. The Pulse output will switch back
the relay contacts to their original state after 5 seconds. The Continuous
output will continue to send a signal for as long as the Alarm sounds.